Sliders


slider60tonStandard Equipment

  • 60 Ton hydraulic wrecker
  • 128″ sliding boom; Locks on sliding system
  • Dual 50,000lbs hydraulic planetary winches
  • 7/8″ x 200` steel cable on each drum
  • Air clutch release on winches
  • Air cable tensionners
  • Direct mounted tandem hydraulic pump
  • Dual 8″ bore cylinders for power boom elevation
  • Lock & Safety valve on elevation & extension cylinders
  • “V” shaped boom
  • Directionnal boom sheave
  • Nylon slide on boom
  • Dual independant hydraulic rear jack legs
  • Removable spades for jack legs
  • Lubrication fittings on all moving parts
  • Dual control
  • Lights in levers control; 2 pressure gauges
  • Heavy duty body 100″ wide
  • 242″ C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint
  • Monocoque body
  • Rear mounted recovery anchors
  • Federal standard #108 light group and Mud flaps
  • Electric plug & Air plug
  • Call 800.246.4785 for additional information

Wrecker Specifications

  • Boom basic structural rating fully retracted: 120,000lbs
  • Boom basic structural rating fully extended: 50,000lbs
  • Reach past tailgate (3rd stage): 371″
  • Maximum Boom working height(3rd stage): 476″
  • Range of elevation: 0° – 61°

Axle-Lift Specifications

  • H.D.: capacity fully retracted: 35,000lbs; Reach: 71″
  • H.D.: capacity fully extended: 15,000lbs; Reach: 110″
  • S.H.D.: capacity fully retracted: 50,000lbs; Reach: 86″
  • S.H.D.: capacity fully extended: 20,000lbs; Reach: 136″

Chassis Specifications

  • Front Axle: 18,000lbs minimum
  • Rear Axle:  46,000lbs minimum
  • Tri-axle required
  • C.A. available: 242″ (from cab to center of rearmost axle)
  • Double frame
  • Call 800.246.4785 for more information

Optional Equipment

  • 2 Auxiliary 20,000lbs winches mounted under the boom
  • “L” shaped mounting plate 3/8″
  • “L” shaped mounting plate T1 steel 3/8″
  • Third stage boom
  • Heavy duty axle-lift
  • Super heavy duty axle-lift
  • Tunnel tool box 24″ to 72″
  • Battery box inside the tunnel tool box
  • Work lights in standard tool boxes
  • Work lights in standard & tunnel tool box
  • Light pylon
  • Aluminum cover inside the light pylon
  • Winch covers
  • Aluminum checker plate on top of tunnel tool box
  • Aluminum checker plate on rear steps
  • 2 work lights under the bumper
  • Wireless remote control
  • Stainless on boom
  • Stainless on mast
  • Stainless on light pylon
  • Stainless on winch covers
  • Paint
  • Installation

Dimensional Drawing

graph_slider65ton

 

 

 

 

 

 

___________________________________________________________________________________________________

slider45tonStandard Equipment

  • 45 Ton hydraulic wrecker
  • 90″ sliding boom; Locks on sliding system
  • Dual 45,000lbs hydraulic planetary winches
  • 3/4″ x 200` steel cable on each drum
  • Air clutch release on winches
  • Air cable tensionners
  • Direct mounted tandem hydraulic pump
  • Dual 6-1/2″ bore cylinders for power boom elevation
  • Lock & Safety valve on elevation & extension cylinders
  • “V” shaped boom
  • Directionnal boom sheave
  • Nylon slide on boom
  • Dual independant hydraulic rear jack legs
  • Removable spades for jack legs
  • Lubrication fittings on all moving parts
  • Dual control
  • Lights in levers control; 2 pressure gauges
  • Heavy duty body 96″ wide
  • Hi-tensile steel used for structural parts
  • Two tool boxes (36 CuFt)
  • Door Check & hold back
  • 168″ C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint
  • Monocoque body
  • Rear mounted recovery anchors
  • Federal standard #108 light group and Mud flaps
  • Electric plug & Air plug
  • Call 800.246.4785 for additional information

Wrecker Specifications

  • Boom basic structural rating fully retracted: 90,000lbs
  • Boom basic structural rating fully extended: 40,000lbs
  • Reach past tailgate (3rd stage): 288″
  • Maximum Boom working height(3rd stage): 382″
  • Range of elevation: 0° – 56°

Axle-Lift Specifications

  • H.D.: capacity fully retracted: 35,000lbs; Reach: 71″
  • H.D.: capacity fully extended: 15,000lbs; Reach: 110″
  • S.H.D.: capacity fully retracted: 50,000lbs; Reach: 86″
  • S.H.D.: capacity fully extended: 20,000lbs; Reach: 136″

Chassis Specifications

  • Front Axle: 14,600lbs minimum
  • Rear Axle:  40,000lbs minimum
  • Tri-axle required
  • C.A. available: 168″ (from cab to center of rearmost axle)
  • Double frame
  • Call 800.246.4785 for more information

Optional Equipment

  • Tri-axle body for 54″ spread (26″ longer, 194″ CA, smaller tool boxes)
  • 2 Auxiliary 20,000lbs winches mounted under the boom
  • “L” shaped mounting plate 3/8″
  • “L” shaped mounting plate T1 steel 3/8″
  • Third stage boom
  • Heavy duty axle-lift
  • Super heavy duty axle-lift
  • Tunnel tool box 24″ to 72″
  • Battery box inside the tunnel tool box
  • Work lights in standard tool boxes
  • Work lights in standard & tunnel tool box
  • Light pylon
  • Aluminum cover inside the light pylon
  • Winch covers
  • Aluminum checker plate on top of tunnel tool box
  • Aluminum checker plate on rear steps
  • 2 work lights under the bumper
  • Extra marker light
  • Wireless remote control
  • Stainless packsage
  • Stainless on boom
  • Stainless on mast
  • Stainless on light pylon
  • Stainless on bottom of body
  • Stainless on winch covers
  • Stainless on levers control
  • Paint
  • Installation

Dimensional Drawing

graph_slider45ton1

 

 

 

 

 

__________________________________________________________________________________________________

slider35tonStandard Equipment

  • 35 Ton hydraulic wrecker
  • 90″ sliding boom; Locks on sliding system
  • Dual 35,000lbs hydraulic planetary gear winches
  • 3/4″ x 200` steel cable on each drum
  • Air clutch release on winches
  • Air cable tensionners
  • Direct mounted tandem hydraulic pump
  • Dual 6″ bore x 40-5/8″ cylinder for power boom elevation
  • Lock & Safety valve on elevation & extension cylinders
  • “V” shaped boom
  • Directionnal boom sheave
  • Nylon slide on boom
  • Dual independant hydraulic rear jack legs
  • Removable spades for jack legs
  • Lubrication fittings on all moving parts
  • Dual control
  • Lights in levers control; 2 pressure gauges
  • Heavy duty body 96″ wide
  • Hi-tensile steel used for structural parts
  • 2 tool boxes (36 CuFt); Door check & hold back
  • 168″ C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint
  • Undercoating underneath the body
  • Monocoque body
  • Rear mounted recovery anchors
  • Federal standard #108 light group and Mud flaps
  • Electric plug & Air plug
  • Call 800.246.4785 for additional information

Wrecker Specifications

  • Boom basic structural rating fully retracted: 70,000lbs
  • Boom basic structural rating fully extended: 30,000lbs
  • Reach past tailgate (3rd stage): 287″
  • Maximum Boom working height(3rd stage): 367″
  • Range of elevation: 0° – 53°
Axle-Lift Specifications

  • H.D.: capacity fully retracted: 35,000lbs; Reach: 71″
  • H.D.: capacity fully extracted: 15,000lbs; Reach: 110″
  • S.H.D.: capacity fully retracted: 50,000lbs; Reach: 86″
  • S.H.D.: capacity fully extended: 20,000lbs; Reach: 136″

Chassis Specifications

  • Front Axle: 14,600 minimum
  • Rear Axle: 44,000 minimum
  • C.A. available: 168″ (from cab to center of rearmost axle)
  • Double frame
  • Call 800.246.4785 for more information

Optional Equipment

  • Tri-axle body for 54″ spread (26″ longer, 194″ CA, smaller tool boxes
  • 2 Auxiliary 15,000lb winches mounted under the boom
  • “L” shaped mounting plate 3/8″
  • “L” shaped mounting plates T1 steel 3/8″
  • Third stage boom
  • Heavy duty axle-lift
  • Super heavy duty axle-lift
  • Tunnel tool box 24″ to 72″
  • Battery box inside the tunnel tool box
  • Work lights in standard tool boxes
  • Work lights in standard & tunnel tool box
  • Light pylon
  • Aluminum cover inside the light pylon
  • Winch covers
  • Aluminum checker plate on top of tunnel tool box
  • Aluminum checker plate on rear steps
  • 2 work lights under the bumper
  • Extra marker light
  • Wireless remote control
  • Stainless package
  • Stainless on boom
  • Stainless on mast
  • Stainless on light pylon
  • Stainless on bottom of body
  • Stainless on winch covers
  • Stainless on levers control
  • Paint
  • Installation

Dimensional Drawing

graph_slider35ton1

 

 

 

 

 

 

__________________________________________________________________________________________________

slider30tonStandard Equipment

  • 30 Ton hydraulic wrecker
  • 81″ sliding boom; Locks on sliding system
  • Dual 25,000lbs hydraulic planetary winches
  • 5/8″ x 200` steel cable on each drum
  • Air clutch release on winches + cable tensionners
  • Direct mounted tandem hydraulic pump
  • Dual 5″ bore x 43-1/4″ cylinders for power boom elevation
  • Lock & Safety valve on elevation cylinder
  • Two stage power boom extension
  • Directionnal boom sheave; Nylon slide on boom
  • Dual independant hydraulic rear jack legs
  • Removable spades for jack legs
  • Lubrication fittings on all moving parts
  • Dual control
  • Lights in levers control
  • Heavy duty body 96″ wide
  • Hi-tensile steel used for structural parts
  • 2 tool boxes (15 CuFt); Door check & hold back
  • 142″ C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint
  • Undercoating underneath the body
  • Monocoque body
  • Rear mounted recovery anchors
  • Federal standard #108 light group and Mud flaps
  • Electric plug & Air plug
  • Call 800.246.4785 for additional information

 Wrecker Specifications

  • Boom basic structural rating fully retracted: 60,000lbs
  • Boom basic structural rating fully extended: 25,000lbs
  • Reach past tailgate (3rd stage): 179″
  • Maximum Boom working height(3rd stage): 292″
  • Range of elevation: 0° – 63°
Axle-Lift Specifications

  • H.D.: capacity fully retracted: 35,000lbs; Reach: 71″
  • H.D.: capacity fully extracted: 15,000lbs; Reach: 110″
  • S.H.D.: capacity fully retracted: 50,000lbs; Reach: 86″
  • S.H.D.: capacity fully extended: 20,000lbs; Reach: 136″

Chassis Specifications

  • Front Axle: 14,600 minimum
  • Rear Axle: 40,000 minimum
  • C.A. available: 142″ (from cab to center of rearmost axle)
  • Double frame
  • Call 800.246.4785 for more information

Optional Equipment

  • “L” shaped mounting plate 5/16″
  • “L” shaped mounting plates T1 steel 5/16″
  • Heavy duty axle-lift
  • Super heavy duty axle-lift
  • Tunnel tool box 24″ to 72″
  • Battery box inside the tunnel tool box
  • Work lights in standard tool boxes
  • Work lights in standard & tunnel tool box
  • Light pylon
  • Aluminum cover inside the light pylon
  • Winch covers
  • Aluminum checker plate on top of tunnel tool box
  • Aluminum checker plate on rear steps
  • 2 work lights under the bumper
  • Extra marker light
  • Wireless remote control
  • Stainless package
  • Stainless on boom
  • Stainless on mast
  • Stainless on light pylon
  • Stainless on bottom of body
  • Stainless on winch covers
  • Stainless on levers control
  • Paint
  • Installation

Dimensional Drawing

graph_slider30ton

 

 

 

 

 

 

__________________________________________________________________________________________________

slider20tonStandard Equipment

  • 20 Ton hydraulic wrecker
  • 58″ sliding boom; Locks on sliding system
  • Dual 20,000lbs hydraulic planetary winches
  • 9/16″ x 200` steel cable on each drum
  • Air clutch release on winches
  • Air cable tensionners
  • Direct mounted tandem hydraulic pump
  • Single 5-1/2″ bore x 36-3/8″ cylinder for power boom elevation
  • Lock & Safety valve on elevation & extension cyls
  • Two stage power boom extension
  • Directionnal boom sheave
  • Nylon slide on boom
  • Dual independant  hydraulic rear jack legs
  • Removable spades for jack legs
  • Lights in levers control
  • Heavy duty body 96″ wide
  • Hi-tensile steel used for structural parts
  • 2 tool boxes (15 CuFt); Door check & hold back
  • 110″ C.A. (from cab to center of rearmost axle)
  • Sandblast & Epoxy primer paint
  • Undercoating underneath the body
  • Monocoque body
  • Rear mounted recovery anchors
  • Federal standard #108 light group and Mud flaps
  • Electric plug & Air plug
  • Call 800.246.4785 for additional information

Wrecker Specifications

  • Boom basic structural rating fully retracted: 40,000lbs
  • Boom basic structural rating fully extended: 12,000lbs
  • Reach past tailgate (3rd stage): 135″
  • Maximum Boom working height(3rd stage): 218″
  • Range of elevation: 0° – 44°
Axle-Lift Specifications
  • S.H.D.: capacity fully retracted: 25,000lbs; Reach: 70″
  • S.H.D.: capacity fully extended: 12,000lbs; Reach: 109″
  • H.D.: capacity fully retracted: 35,000lbs; Reach: 71″
  • H.D.: capacity fully extracted: 15,000lbs; Reach: 110″

Chassis Specifications

  • Front Axle: 12,000 minimum
  • Rear Axle: 23,000 minimum
  • C.A. available: 110″ (from cab to center of rearmost axle)
  • Also available for tandem chassis (from 124″ C.A.)
  • Call 800.246.4785 for more information

Optional Equipment

  • Tandem body for 52″ or 54″ spread (14″ longer, 124″ C.A.)
  • “L” shaped mounting plate 5/16″
  • “L” shaped mounting plates T1 steel 3/8″
  • Super medium duty axle-lift
  • Heavy duty axle-lift
  • Tunnel tool box 24″ to 72″
  • Battery box inside the tunnel tool box
  • Work lights in standard tool boxes
  • Work lights in standard & tunnel tool box
  • Light pylon
  • Aluminum cover inside the light pylon
  • Winch covers
  • Aluminum checker plate on top of tunnel tool box
  • Aluminum checker plate on rear steps
  • 2 work lights under the bumper
  • Extra marker light
  • Wireless remote control
  • Stainless package
  • Stainless on boom
  • Stainless on mast
  • Stainless on light pylon
  • Stainless on bottom of body
  • Stainless on winch covers
  • Paint
  • Installation

Dimensional Drawing

graph_slider20ton

 

 

 

 

 

 

__________________________________________________________________________________________________

Comments are closed.